As mentioned above, this is the skin configuration file. It is line oriented;
comment lines start with a ';' character at the beginning of
the line (only spaces and tabs are allowed before the ';').
The file is made up of sections. Each section describes the skin for an application and has the following form:
section = section name
.
.
.
end
Currently there is only one application, so you need only one section: its name is movieplayer.
Within this section each window is described by a block of the following form:
window = window name
.
.
.
end
where window name can be one of these strings:
main - for the main window
sub - for the subwindow
menu - for the skin menu
playbar - playbar
(The sub and menu blocks are optional - you do not need to create a menu or decorate the subwindow.)
Within a window block, you can define each item for the window by a line in this form:
item = parameter
Where item is a string that identifies the type of the GUI
item, parameter is a numeric or textual value (or a list of
values separated by commas).
Putting the above together, the whole file looks something like this:
section = movieplayer window = main ; ... items for main window ... end window = sub ; ... items for subwindow ... end window = menu ; ... items for menu ... end window = playbar ; ... items for playbar ... end end
The name of an image file must be given without leading directories - images
are searched for in the skins directory.
You may (but you need not) specify the extension of the file. If the file does
not exist, MPlayer tries to load the file
<filename>.<ext>, where png
and PNG are tried for <ext>
(in this order). The first matching file will be used.
Here is an example to make this clear. Suppose that you have an image called main.png that you use for the main window:
base = main, -1, -1
MPlayer tries to load main, main.png, main.PNG files.
Finally some words about positioning. The main window and the subwindow can be
placed in the different corners of the screen by giving X
and Y coordinates. 0 is top or left,
-1 is center and -2 is right or bottom, as
shown in this illustration:
(0, 0)----(-1, 0)----(-2, 0) | | | | | | (0,-1)----(-1,-1)----(-2,-1) | | | | | | (0,-2)----(-1,-2)----(-2,-2)
Below is the list of entries that can be used in the
'window = main' ... 'end',
and the 'window = playbar' ... 'end'
blocks.
base = image, X, Y
Lets you specify the background image to be used for the main window.
The window will appear at the given X,Y position on
the screen The window will have the size of the image.
These coordinates do not currently work for the display window.
Transparent regions in the image (colored #FF00FF) appear black on X servers without the XShape extension. The image's width must be dividable by 8.
button = image, X, Y, width, height, message
Place a button of width * height size at
position X,Y. The specified message is
generated when the button is clicked. The image given by
image must have three parts below each other (according to
the possible states of the button), like this:
+------------+ | pressed | +------------+ | released | +------------+ | disabled | +------------+
decoration = enable|disable
Enable or disable window manager decoration of the main window. Default is disable.
This doesn't work for the display window, there is no need to.
hpotmeter = button, bwidth, bheight, phases, numphases, default, X, Y, width, height, message
vpotmeter = button, bwidth, bheight, phases, numphases, default, X, Y, width, height, message
Place a horizontal (hpotmeter) or vertical (vpotmeter) potmeter of
width * height size at position
X,Y. The image can be divided into different parts for the
different phases of the potmeter (for example, you can have a pot for volume
control that turns from green to red while its value changes from the minimum
to the maximum.). hpotmeter can have a button that can be
dragged horizontally. The parameters are:
button - the image to be used for the
button (must have three parts below each other, like in case of
button)
bwidth, bheight - size
of the button
phases - the image to be used for the
different phases of the hpotmeter. A special value of NULL
can be used if you want no such image. The image must be divided into
numphases parts vertically like this:
+------------+
| phase #1 |
+------------+
| phase #2 |
+------------+
...
+------------+
| phase #n |
+------------+
numphases - number of phases stored in the
phases image
default - default value for hpotmeter
(in the range 0 to 100)
X, Y - position for the hpotmeter
width, height - width and height
of the hpotmeter
message - the message to be generated when the
value of hpotmeter is changed
potmeter = phases, numphases, default, X, Y, width, height, message
A hpotmeter without a button. (I guess it is meant to be
turned around, but it reacts to horizontal dragging only.) For the description
of the parameters see hpotmeter.
phases can be NULL, but it is quite
useless, since you cannot see where the potmeter is set.
font = fontfile, fontid
Defines a font. fontfile is the name of a font description
file with a .fnt extension (do not specify the extension
here). fontid is used to refer to the font
(see dlabel
and slabel). Up to 25 fonts can be defined.
slabel = X, Y, fontid, "text"
Place a static label at the position X,Y.
text is displayed using the font identified by
fontid. The text is just a raw string
($x variables do not work) that must be enclosed between
double quotes (but the " character cannot be part of the text). The
label is displayed using the font identified by fontid.
dlabel = X, Y, length, align, fontid, "text"
Place a dynamic label at the position X,Y. The label is
called dynamic because its text is refreshed periodically. The maximum length
of the label is given by length (its height is the height
of a character). If the text to be displayed is wider than that, it will be
scrolled,
otherwise it is aligned within the specified space by the value of the
align parameter: 0 is for right,
1 is for center, 2 is for left.
The text to be displayed is given by text: It must be
written between double quotes (but the " character cannot be part of the
text). The label is displayed using the font identified by
fontid. You can use the following variables in the text:
| Variable | Meaning |
|---|---|
| $1 | play time in hh:mm:ss format |
| $2 | play time in mmmm:ss format |
| $3 | play time in hh format (hours) |
| $4 | play time in mm format (minutes) |
| $5 | play time in ss format (seconds) |
| $6 | movie length in hh:mm:ss format |
| $7 | movie length in mmmm:ss format |
| $8 | play time in h:mm:ss format |
| $v | volume in xxx.xx% format |
| $V | volume in xxx.xx format |
| $b | balance in xxx.xx% format |
| $B | balance in xxx.xx format |
| $$ | the $ character |
| $a | a character according to the audio type (none: n,
mono: m, stereo: t) |
| $t | track number (in playlist) |
| $o | filename |
| $f | filename in lower case |
| $F | filename in upper case |
| $T |
a character according to the stream type (file: f,
Video CD: v, DVD: d,
URL: u)
|
| $p | the p character (if a movie is playing and the font has the p character) |
| $s | the s character (if the movie is stopped and the font has the s character) |
| $e | the e character (if playback is paused and the font has the e character) |
| $x | movie width |
| $y | movie height |
| $C | name of the codec used |
The $a, $T, $p, $s and $e
variables all return characters that should be displayed as special symbols
(for example, e is for the pause symbol that usually looks
something like ||). You should have a font for normal characters and
a different font for symbols. See the section about
symbols for more information.
The following entries can be used in the
'window = sub' . . . 'end' block.
base = image, X, Y, width, height
The image to be displayed in the window. The window will appear at the given
X,Y position on the screen (0,0 is the
top left corner). You can specify -1 for center and
-2 for right (X) and bottom
(Y). The window will be as large as the image.
width and height
denote the size of the window; they are optional (if they are missing, the
window is the same size as the image).
background = R, G, B
Lets you set the background color. It is useful if the image is smaller than
the window. R, G and
B specifies the red, green and blue component of the color
(each of them is a decimal number from 0 to 255).
As mentioned earlier, the menu is displayed using two images. Normal menu
entries are taken from the image specified by the base item,
while the currently selected entry is taken from the image specified by the
selected item. You must define the position and size of each
menu entry through the menu item.
The following entries can be used in the
'window = menu'. . .'end' block.
base = image
The image for normal menu entries.
selected = image
The image showing the menu with all entries selected.
menu = X, Y, width, height, message
Defines the X,Y position and the size of a menu entry in
the image. message is the message to be generated when the
mouse button is released over the entry.